Repair IMEI For Qualcomm P50 Pro JAD-LX9 | (EMUI 14.2) | Using DT Pro Tool
This guide will walk you through the process of repairing the IMEI of the Qualcomm P50 Pro JAD-LX9 (EMUI 14.2) using the DT Pro Tool. IMEI repair can fix network issues on your device and make it usable again after certain software or hardware problems. This process requires careful steps and proper tools, so please follow the instructions closely.
Steps to Repair IMEI:
1. Open DT Pro Tool:
The first step is to launch the DT Pro Tool on your computer. This tool will help you connect to your device and perform the IMEI repair process.
2. Select Brand Tab:
After launching the tool, navigate to the "Brand" tab in the DT Pro Tool interface. This is where you will choose the specific model of your device.
3. Choose the Correct Model:
From the list of available models, select P50 Pro JAD-LX9. Make sure it is the one with the latest security updates, as this ensures compatibility with your device.
4. Connect Your Phone in Test Point Mode:
To begin, put your phone into Test Point Mode. This will allow your computer to recognize the device through the Qualcomm 9008 port. Once in Test Point Mode, go back to DT Pro Tool and manually select the Qualcomm 9008 port in the tool's interface.
5. Go to Special Task Tab:
Next, go to the "Special Task" tab within the tool. Here, you will perform some essential tasks:
- Backup Security (EFS/IMEI): This step backs up the security data of your phone, including the IMEI and other important information.
- Backup Firmware: This creates a backup of the phone's current firmware in case something goes wrong during the process.
6. Change Storage Type:
Once the backup is complete, switch the storage type in the tool from Normal/Single RAW to Encrypted. This change is necessary because it allows you to reset the security files (EFS) and upload the backup file safely.
7. Select RAW File:
Next, go to the "Select RAW File" tab and choose the file named (JAD) BootloaderImage.rev.dftpro. It is important to ensure that all partitions are checked before proceeding.
8. Put Device Back in Test Point Mode:
At this point, you need to put your phone back into Test Point Mode again. Once the phone is in Test Point Mode, click on the "Write" button in the DT Pro Tool to start the process of flashing the selected file.
9. Flash the Bootloader File:
After the file is flashed, you might hear a distinct sound from the computer, which indicates the process is running. Next, you will need to flash the backup file you saved earlier by following similar steps.
10. Select RAW File for RPL:
Now, go back to the "Select RAW File" tab and select the RPL file. The RPL file is a compressed file shared with the instructions. You will need to extract this file (it’s typically in .rar format) and load it into the tool. Before you proceed, ensure the tool is set to Encrypted mode.
11. Perform Test Point Mode Again:
Once again, place the device into Test Point Mode and click the "Write" button to flash the RPL file. This step is crucial for the final stages of the repair.
12. Finish Writing the RPL File:
Once the RPL file has been successfully written, the Qualcomm 9008 port will remain active. This means the process has moved forward and your phone is now ready for the next steps.
13. Enter Manufacture Mode:
At this point, put your device into Manufacture Mode by entering a special code on the dialer: *#*#2846579#*#*. After entering the code, the phone will display "DBAdapter Reserved Interface," indicating that the phone is in Manufacture Mode.
14. IMEI Repair:
Now, return to the "Special Task" tab in the DT Pro Tool and select the IMEI Repair option.
15. Enter Original IMEIs:
In the tool, enter your phone’s original IMEI numbers. You can usually find these numbers on the phone’s box or by dialing *#06# on your device. After you enter the IMEI, you should hear a sound from the computer, confirming that the IMEI repair was successful.
| Info. | Details |
|---|---|
| Software Name: | Repair IMEI For Qualcomm P50 Pro JAD-LX9 |
| Version: | 2024 |
| Password: | Free |
| File Size: | 70. MB |
| Files Hosted By: | https://www.gsmcracksguru.com/ |
Conclusion:
By following these step-by-step instructions, you should be able to successfully repair the IMEI of your Qualcomm P50 Pro JAD-LX9. The process involves using the DT Pro Tool and requires entering specific modes like Test Point Mode and Manufacture Mode. Always make sure you back up important data like the EFS/IMEI before proceeding with the repair.
Download Info:
Whatsapp Link: Click Here
Telegram Link: Click Here
Facebook Link: Click Here
Post Created By: Uzair Ch
